Passed Avaya https://www.pass4itsure.com/3100.html yesterday on first attempt only using the Exampass premium vce and one corrected answers.Thanks a lot for your valuable update reagding premium dump.It will definitely help me for preparing for the exam before to write.
There are two GUI-based access tools available: Avaya site administration (ASA) and system management interface (SMI).
Which statement correctly differentiates between ASA and SMI?
A. Both SMI and ASA can perform the same administration tasks but ASA is being replaced by SMI.
B. Both SMI and ASA can perform the same administration tasks but SMI is for technicians and ASA is for customers.
C. SMI provides access to less frequent administration, installation and upgrade functions, while ASA provides access to day-to-day administration functions.
D. Old hardware and software (Pre 5.x) is administered using SMI, while current hardware and software
(5.x and later) is administered using ASA.
Correct Answer: C
Consider the signaling Group Information shown in the exhibit.
Which SAT command can you use to get the IP address of the Far-end Node of the Signaling group 50?
A. Display board CLAN10
B. List node-name all
C. List ip-address nodes
D. List ip-interface nodes
Correct Answer: B QUESTION 3
Communication Manager Backups are done through the system management interface (SMI).
Which three statements about the Communication Manager backup function are correct? (Choose three)
A. The backup function creates two complete files on the internal hardware drive.
B. The backup function can create a file on a network device using protocols: SCP, SFTP, or FTP.
C. The backup function can encrypt the file with a pass phrase.
D. The backup is done dynamically and cannot be scheduled in advance.
E. The full Backup option does not do Save Transaction Command Automatically before creating the backup file.
Correct Answer: BCE
You are adding ten new IP telephones in a small company administered with a G430 Media Gateway and a S8300D ICC main server. The G430 has the S8300D inserted in the slot V1, and MM71 in the slot V2, and an MM712 in the slot V3.
Which hardware module will act as Gatekeeper for the telephones?
C. MGP on the media gateway
D. S8300D server using Processor Ethernet (PE)
Correct Answer: D
The Avaya Extension to Cellular feature provides users with the capability to have one administered telephone that supports communication manager features for both an office telephone and one outside cellular or wireless telephone, two fields must be set to “Yes” in order to use this functionality:
Enhanced EC500 and extended Cvg/Fwd Admin.
Which command do you use to verify the field settings?
A. System-parameters features
B. System-parameters customer-options
C. System-parameters wireless
D. System-parameters converge-forwarding
Correct Answer: B
Scenario A remote user Avaya softphone to work from home reports that the client desktop application will not register. After verifying that the user has configured the softphone application to “point” to the current IP address of a Communication Manager Gatekeeper using an administered extension, you ask if the user supplied a password when logging on. The user confirms that the password was used on each log-on attempt.
You look up the user’s information and note that the type field is 4620 (IP telephone) and the security code field is.
With reference to the scenario described in the exhibit, which action should you take to ensure that the user can use the IP SoftPhone?
A. Change the IP SoftPhone field to y.
B. Change the Converge Path 1 value to match the value in converge path 2.
C. Change the message Lamp Ext value to match the extension number.
D. Change the name in the name field to match the name as administered in the LDAP directory.
Correct Answer: A
You want a user’s station to be able to dial extension 5605 and 5608 only.
Which station configuration will achieve this?
A. Assign COR 11 to user’ station, In COR11 Set COR-to COR calling permission = `n’ for all except COR 10. Assign COR to 5605 and 5608. Ensure that these two CORs are not assigned to any other station object.
B. The FRL = 7to user’s station. FRL = 7 to station 5606 and 5608. Set FRL for all other stations to 6 and lesser
C. Assign COR 10 to user’s station. In COR 11, set CPR-to-COR calling permission = `n’ for all except. Assign COR 11 to 5605 and 5608. Ensure that these two CORs are not assigned to any other object.
D. The FRL = 5 to user’s station, FRL = 7 to station 5606 and 5608. Set FRL for all other stations to 5 or lesser.
Correct Answer: A
With reference to the Dial Plan Analysis Tables, how many codes are available in the system for activation / deactivation of features?
Correct Answer: B QUESTION 9
You have to add a new G650 Media Gateway to the system. Which command will perform this I
A. add cabinet next
B. add port network next
C. add media gateway next
D. add G6SO-port next.
Correct Answer: C QUESTION 10
Although not exactly the same, a bridged call appearance and a team button can perform some of the same functions.
Which statement correctly contrasts the team button and bridged call appearance?
A. The team button does not allow conferencing to an active call or speed dial to the monitored station.
B. The team button allows conferencing to an active call and making outgoing calls for the monitored station.
C. The bridged call appearance does not allow conferencing to an active call or speed dial to the mirrored station.
D. The bridged call appearance allows conferencing to an active call and making outgoing calls for the mirrored station.
Correct Answer: D QUESTION 11
You need to configure a station so that when a department manager makes calls to employees the manager’s calls will ring even though the called station might have Sent All Calls activated. Although the manager’s station can be designated as a VIP telephone, the manger must be able to selectively activate this feature.
Which feature addresses this need?
A. Button activated Executive Calling
B. FAC or button activated Automatic Inclusion
C. FAC or button activated Priority Calling
D. Button activated Send All Calls override
Correct Answer: C QUESTION 12
Your customer has a communication Manager 6.0 branch location with SIP endpoints that need to survive a WAN failure when communication to the core or main Session Manager is unavailable.
Which solution will provide survivability to the remote location?
A. an S8300 configured as an local survivable processor (LSP)
B. a simplex server configured as an enterprise survivable server (ESS)
C. an S8300 or simplex server configured as a Survivable Remote
D. an S8300 01 simplex server configured for high availability (HA)
Correct Answer: A QUESTION 13
Consider the settings shown in exhibit displayed by using the display route pattern command. You must deny calls from users in COR 10 to use route pattern 1. What should the fault restriction level (FRL) for COR 10 be?
Correct Answer: A
With reference to the list trace station 1101 printout shown in the exhibit, what statement describes what happened during the time period of the trace?
A. Station 1101 called station, hung-up and finally called station 100.
B. Station 1101 called station 1000, the unanswered call went to the voicemail, and finally station 1101 called 1001.
C. Station 1101 called station 1000, and the station answered, then station 1000 transferred to call to station 1001.
D. Station 1101 called station 1000, unanswered; the call covered the station 1001.
Correct Answer: C
You are configuring Personal Station Access (PSA) and you configure the Communication Manager with the following settings:
Set TTI enabled = `Y’
Set PSA Associated code = `25′ and disassociate code `#25′
Set security code for the station = `1234′
You activate the station by keying in FAC for PSA, station extension number, `#’, the security code of the station, and `#’. However, the station is not activated.
Which statement describes the issue to be addressed?
A. You need to set TTI = `n’
B. You did not enable PSA on the COS of the station.
C. You should not set the security code in sequential order.
D. You did not key in the correct activation sequence
Correct Answer: B QUESTION 16
Which statement most accurately describes the major difference between Automatic Alternative Rom (AAR) and Automatic Route Selection (ARS) in a typical installation?
A. AAR routes calls over a public network; ARS routes calls over a private network.
B. AAR routes calls over a private network; ARS routes calls over a public network.
C. AAR chooses routes automatically; ARS chooses routes according to pre programmed, best- choice parameters.
D. AAR chooses routes automatically; ARS chooses routes according to a manually administered route plan.
Correct Answer: B QUESTION 17
The monitor and display capacity commands can be used to get a real-time status of the system using Avaya Site Administration (ASA).
Which command and tool should you use to view a summary of the overall condition of the system?
A. Monitor system command using terminal emulation mode
B. Monitor system command using GEDI
C. Monitor status command using terminal emulation mode
D. Display status using GEPI or terminal emulation mode
Correct Answer: A QUESTION 18
Which setting in the system parameter feature screen will enable TTI to be applicable to both analog and digital stations?
A. Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `n’.
B. Terminal Trans. Init.? Y, TTI state = `data’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `y’.
C. Terminal Trans. Init.? Y, TTI state = `vdata’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `n’.
D. Terminal Trans. Init.? Y, TTI state = `voice’, TTI enable = `y’, TTI security code = `1709′, CTI enabled = `y’.
Correct Answer: D QUESTION 19
Which user’s does Call Park best serve?
A. users who travel domestically using smartphones for basic communication
B. users who need to pick up calls from any extension In the system when the call Is placed on hold
C. users who travel internationally using smartphones for basic communication
D. users who need to pick up calls from their smartphones while traveling
Correct Answer: B QUESTION 20
Which statement most accurately describes the function of automatic call back feature?
A. It allows internal users who placed a call to a busy or unanswered external telephone to be called back when the called telephone becomes available.
B. It allows internal users who placed a call to a busy or unanswered internal telephone to be called back when the called telephone becomes available.
C. It allows internal users who are called when they are busy to activate a feature to automatically call back that second caller, once the first call is finished.
D. It allows internal users who are called when they are busy to place the second call on hold until the first call is finished.
Correct Answer: B
The Avaya 3100 training is a vital way of becoming the best.This Avaya https://www.pass4itsure.com/3100.html certification has helped the candidates to enhance their capabilities by providing a great learning platform to them so that they can polish their skills.