[100% Pass Rate] Most Reliable Cisco 200-310 Dumps DESGN Exam Designing for Cisco Internetwork Solutions Youtube Training 515Q Full Version Offer 1-40
Who has the valid new Cisco 200-310 dumps exam? The Designing for Cisco Internetwork Solutions (200-310 DESGN) exam is a 75 minutes (55 – 65 questions) assessment in pass4itsure that is associated with the CCDA certification. Most reliable Cisco 200-310 dumps DESGN exam Designing for Cisco Internetwork Solutions Youtube training. “Designing for Cisco Internetwork Solutions” is the exam name of Pass4itsure Cisco 200-310 dumps test which designed to help candidates prepare for and pass the Cisco 200-310 exam. Many people who have passed some IT related certification exams used our Pass4itsure’s training tool. Our Pass4itsure expert team use their experience for many people participating in Cisco certification https://www.pass4itsure.com/200-310.html dumps to develope the latest effective training tools, which includes Cisco 300-080 exam test, the current exam and answers.
[100% Pass Rate Cisco 200-310 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWajNRNzNfaDllX3M
[100% Pass Rate Cisco 200-355 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWUkUwT0lYclNxbFU
2018 Feb Pass4itsure Cisco 200-310 Dumps Actual Test(1-40)
QUESTION 1
Which two statements about designing the Enterprise Data Center Access submodule are correct? (Choose two)
A. Multiport NIC servers should each have their own IP address
B. Layer 3 connectivity should never be used in the access layer
C. Layer 2 connectivity is primarily implemented in the access layer
D. Multiport NIC servers should never be used in the access layer
E. Layer 2 clustering implementation requires servers to be Layer 2 adjacent
200-310 exam Correct Answer: CE
QUESTION 2
Which type of structure consists of the addressing, routing protocols, QoS, and security components?
A. Logical
B. Physical
C. Layered
D. Virtual
Correct Answer: A
QUESTION 3
When designing for a remote worker, which two are typical requirements? (Choose two.)
A. Best-effort interactive and low-volume traffic patterns
B. Connections to the enterprise edge using Layer 2 WAN technologies
C. Always-on connection with SLA from ISP
D. Voice and IPsec VPN support
E. High-end security devices with stateful firewall filtering
F. Dual or multihoming to ISPs
200-310 pdf Correct Answer: CD
QUESTION 4
What is the recommended spanning tree protocol to use for all Layer 2 deployments in a branch office environment?
A. CST
B. RSPT
C. PVST
D. MISTP
E. Rapid PVST+
Correct Answer: E
QUESTION 5
Why would an engineer implement variable length subnet masks?
A. To make a subnet public
B. To prevent wasting IP addresses
C. To make a subnet its own VLAN
D. To expand an existing subnet
200-310 vce Correct Answer: B
QUESTION 6
When is the Cisco FlexConnect design model recommended?
A. When remote-site APs are centrally managed
B. When each remote site has its own wireless controller
C. When each remote site runs VSS
D. When the remote sites use WAN optimization
Correct Answer: A
QUESTION 7
What three primary sources of information are needed to perform a network audit? (Choose three.)
A. Existing documentation
B. New documentation
C. Existing network management software
D. New network management tools
E. Management personnel
F. Technical personnel
200-310 dumps Correct Answer: ACD
QUESTION 8
What are the three models that are required in the systematic approach of the top-down design methodology? (Choose three.)
A. Logical
B. Physical
C. Layered
D. Network components
E. Technological
F. Protocols
G. Virtual
Correct Answer: ABC
QUESTION 9
Your supervisor has asked you to deploy a routing protocol within the lab environment that will allow for unequal cost multipath routing. Which should you choose?
A. EIGRP
B. OSPF
C. IS-IS
D. RIP
200-310 exam Correct Answer: A
QUESTION 10
A company would like to distribute a VM hosting cluster between three data centers with the capability to move VMs between sites. The connectivity between data centers is IP only, and the new design should use existing WAN. Which layer 2 tunneling technology should be used?
A. VPLS
B. L2TPv3
C. OTV
D. AToM
Correct Answer: C
QUESTION 11
Which protocol is used for voice bearer traffic?
A. MGCP
B. RTP
C. SCCP
D. CDP
E. ICMP
200-310 pdf Correct Answer: B
QUESTION 12
Which two enterprise campus layers are combined in a medium-sized LAN? (Choose two.)
A. Core
B. Distribution
C. Access
D. Backbone
E. Aggregation
Correct Answer: AB
QUESTION 13
A network engineer at a technical call center receives a call from a customer complaining that only 56 kbps of data can be transferred over the T1 Frame Relay WAN circuit at a remote site. The engineer checks the Frame Relay switch and confirms that only 56 kbps is being transferred over the circuit. The engineer requests the router configuration of the customer headquarters site router. What is causing this issue to occur?
A. The wrong CIR is configured
B. The BECN configuration is causing this issue
C. The class name is spelled wrong under the interface
D. The wrong DLCI number is assigned to the interface
200-310 vce Correct Answer: C
QUESTION 14
Which WAN technology is a cost-effective method to deliver 100Mb of bandwidth to multiple branch offices?
A. DSL
B. DWDM
C. ISDN
D. Metro Ethernet
Correct Answer: D
QUESTION 15
Which IP telephony component supports VoIP, PoE, and QoS?
A. Client Endpoints
B. Voice-enabled infrastructure
C. Cisco Unified Communications Manager
D. Cisco Unified Contact Center
200-310 dumps Correct Answer: B
QUESTION 16
What two SAN protocols will allow a customer to utilize 10GbE for SAN access? (Choose two.)
A. iSCSI
B. FCoE C. SATA
D. Fiber Channel
E. AoE
Correct Answer: AB
QUESTION 17
Which configuration can be used to implement FHRP protocol and load balancing at the same time?
A. R1 interface Ethernet0 ip address 171.16.6.5 255.255.255.0 standby 1 preempt standby 1 ip 171.16.6.100 standby 1 track Serial0 standby 2 preempt standby 2 ip 171.16.6.200 standby 2 track Serial0 standby 2 priority 95 ! R2 interface Ethernet0 ip address 171.16.6.6 255.255.255.0 standby 1 preempt standby 1 ip 171.16.6.100 standby 1 track Serial0 standby 2 preempt standby 2 ip 171.16.6.200 standby 2 track Serial0
B. R1 interface Ethernet0 ip address 171.16.6.5 255.255.255.0 standby 1 preempt standby 1 ip 171.16.6.100 standby 1 track Serial0 standby 1 priority 95 ! R2 interface Ethernet0 ip address 171.16.6.6 255.255.255.0 standby 1 preempt standby 1 ip 171.16.6.100 standby 1 track Serial0 standby 1 priority 95
C. R1 interface Ethernet0 ip address 171.16.6.5 255.255.255.0 standby 1 preempt standby 1 ip 171.16.6.100 standby 1 track Serial0 standby 1 priority 95 standby 2 preempt standby 2 ip 171.16.6.200 standby 2 track Serial0 standby 2 priority 95
!
R2
interface Ethernet0
ip address 171.16.6.6 255.255.255.0
standby 1 preempt
standby 1 ip 171.16.6.100
standby 1 track Serial0
standby 2 preempt
standby 2 ip 171.16.6.200
standby 2 track Serial0
D. R1 interface Ethernet0 ip address 171.16.6.5 255.255.255.0 standby 1 preempt standby 1 ip 171.16.6.100 standby 1 track Serial0 standby 1 priority 95 ! R2 interface Ethernet0 ip address 171.16.6.6 255.255.255.0 standby 1 preempt standby 1 ip 171.16.6.100
200-310 exam Correct Answer: A
QUESTION 18
What business trend allows employees to use personal devices to access enterprise data and systems?
A. ISE
B. BYOD
C. SAN
D. IOE
Correct Answer: B
QUESTION 19
Which two of the following are benefits of using a modular approach to network design? (Choose two.)
A. Improve flexibility
B. Facilitates implementation
C. Lowers implementation costs
D. Improves customer participation in the design process
200-310 pdf Correct Answer: AB
QUESTION 20
Which two states are RSTP port states? (Choose two.)
A. Discarding
B. Learning
C. Blocking
D. Listening
E. Disabled
Correct Answer: AB
QUESTION 21
Which three of these are layers in the Cisco SONA Architecture? (Choose three.)
A. Application
B. Physical Infrastructure
C. Presentation
D. Integrated Transport
E. Core Common Services
F. Networked Infrastructure
200-310 vce Correct Answer: ABF
QUESTION 22
What are two advantages of employing scalability when designing a campus network? (Choose two.)
A. Reduces operational cost
B. Higher port density
C. Investment protection
D. Consistent operation
E. Improved fault tolerance
Correct Answer: DE
QUESTION 23
Which two statements about the Enterprise Data Center Aggregation submodule are correct? (Choose two.)
A. it provides Layer 4-7 services
B. It should never support STP
C. It is the critical point for control and application services
D. It typically provides Layer 2 connectivity from the data center to the core
200-310 exam Correct Answer: AC
QUESTION 24
What branch design supports 100 to 1000 users and integrates ASA firewalls ?
A. Small
B. Medium
C. Large
D. Extra large
Correct Answer: C
QUESTION 25
A network engineer is attempting to separate routing domains using virtualization technology. What protocol can be configured to perform this task?
A. VLAN
B. VSAN
C. VRF
D. vPC
200-310 exam Correct Answer: C
QUESTION 26
A network design shows two routers that are directly connected to an Ethernet switch using optical connections. There is an OSPF Adjacency between the routers. In this design, which solution ensures that interface-down detection is reported as quickly as possible to the IGP?
A. Optimized OSPF SPF timers
B. Bidirectional Forwarding Detection
C. Automatic protection switching
D. Optimized OSPF LSA timers
E. Ethernet OAM CFM monitoring
Correct Answer: B
QUESTION 27
What three customer supported details identifies network requirements based on the PPDIOO design model? (Choose three.)
A. Goals
B. Budget
C. User needs
D. Locations
E. Policies
F. Tasks
200-310 dumps Correct Answer: ABC
QUESTION 28
Which two are characteristics of a Lightweight Access Point? (Choose two.)
A. Managed via a central wireless LAN controller
B. Code upgrade performed via a TFTP server
C. CAPWAP tunnels
D. Managed directly via CLI or web interface
Correct Answer: AC
QUESTION 29
Which two statements correctly identify the layers of the Enterprise Campus module? (Choose two)
A. A is the Data Center Module and C is the Campus Core layer
B. A is the Data Center Module and D is the Building Access layer
C. B is the Campus Core layer and C is the Building Distribution layer
D. B is the Building Distribution layer and C is the Campus Core layer
E. A is the Internet Connectivity layer and B is the Campus Core layer
F. B is the Building Distribution layer and D is the Building Access layer
Correct Answer: BC
QUESTION 30
A standard Layer 2 campus network design is pictured. Which numbered box represents the distribution layer?
A. #1
B. #2
C. #3
D. #4
Correct Answer: B
QUESTION 31
What IPv4 addressing technique is used for proper address planning to reduce the number of entries in a routing table?
A. Filtering
B. Tunneling
C. Summarization
D. Translation
E. Supernetting
Correct Answer: C
QUESTION 32
When designing the threat detection and mitigation portion for the enterprise data center network, which of the following would be the most appropriate solution to consider?
A. 802.1x
B. ACL in the Core layer
C. Cisco Security MARS
D. Cisco Firewall Services Module
Correct Answer: C
QUESTION 33
What three considerations should be taken into account when selecting a routing protocol? (Choose three.)
A. Classful routing
B. Scalability
C. Default route origination
D. Multi vendor support
E. Link load balancing
F. Hop count
200-310 exam Correct Answer: BDE
QUESTION 34
Which network access control technology is recommended to use with Layer 2 access layer switches?
A. 802.1q
B. 802.1x
C. 802.3af
D. 802.3q
E. 802.11n
Correct Answer: B
QUESTION 35
What is the primary advantage of implementing a wireless LAN controller in a wireless LAN design?
A. Roaming between APs
B. RADIUS user authentication
C. Radio resource management
D. accelerated data transfer
200-310 dumps Correct Answer: C
QUESTION 36
Which option is a benefit of Cisco Discovery Protocol?
A. Provides information about directly connected Cisco devices
B. Provides greater detail about collected data, including time stamping
C. Combines with the network layer data that is gathered by NetFlow when using a NetFlow collector
D. Part of the IEEE 802.1ab standard
Correct Answer: A
QUESTION 37
Which two statements best describe an OSPF deployment? (Choose two.)
A. ABR provides automatic classful network boundary summarization
B. ABR requires manual configuration for classful network summarization
C. External routes are propagated into the autonomous system from stub areas via ASBR
D. External routes are propagated into the autonomous system from regular areas or NSSA via ASBR
E. External routes are propagated into the autonomous system from regular areas or NSSA via ABR
200-310 pdf Correct Answer: BD
QUESTION 38
A dynamically routed private line and a statically routed IPsec tunnel connect two offices.
What routing configuration prefers the IPsec tunnel only in the event of a private line failure?
A. Floating static entry
B. EIGRP variance
C. Bandwidth metric
D. OSPF maximum path
Correct Answer: A
QUESTION 39
A network engineer has finished designing and implementing a new network. What two protocols would they use to gain insight into the network and determine the components that require optimization? (Choose two.)
A. CDP
B. NetFlow
C. ICMP Echo
D. NMAP
E. SNMP
200-310 vce Correct Answer: BE
QUESTION 40
What is the key limitation of using Internet circuits as a backup to a private enterprise WAN?
A. Circuit bandwidth
B. Prioritization
C. Security
D. Operational expense
Correct Answer: B
See What Our Customers Are Saying:
We at Pass4itsure are committed to our customer’s success. There are 50,000+ customers who used this preparation material for the preparation of various certification exams and this number of customers is enough for new candidates to trust in these products. Our Cisco 200-310 dumps are created with utmost care and professionalism. We utilize the experience and knowledge of a team of industry professionals from leading organizations all over the world.
Pass4itsure Cisco 200-310 dumps is the best catalyst to help IT personage be successful. “Designing for Cisco Internetwork Solutions”, also known as 200-310 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Pass4itsure Cisco 200-310 dumps exam questions answers are updated (515 Q&As) are verified by experts. The associated certifications of 200-310 dumps is CCDA. Our Pass4itsure’s test questions and answers have 95% similarity with the real exam. With Pass4itsure’s training tool your Cisco certification https://www.pass4itsure.com/200-310.html dumps exams can be easy passed.
Read More Youtube: https://youtu.be/01_GsTgocOM
Compared with other brands, Pass4itsure has up to dated exam information, affordable price, instant exam PDF files downloaded, error correction, unlimited install,etc. Such as
Pass4itsure Most Reliable Cisco 200-310 Dumps Demos, Real Cisco 200-310 Dumps Cert, We Help You Pass Designing for Cisco Internetwork Solutions. Simple and Easy! To take advantage of the guarantee, simply contact Customer Support, requesting the exam you would like to claim. Pass4itsure guarantee insures your success otherwise get your MONEYBACK!