We are committed to FLYDUMPS leveraging the power of remote management services to enable users to manage their security systems from Motorola Solutions MSC-122 exam anywhere in the world, while providing the reseller community with exciting new revenue opportunities. Its innovative EMC features such as multi-site management; global access control settings, e-mail message alerts, VoIP support, remote backup and configuration replication can be resold in parts and priced accordingly. Get FLYDUMPS Motorola Solutions https://www.pass4itsure.com/MSC-122.html exam sample questions, questions and answers, books, pdf and study guide. To address a growing market demand for EMC analytics savvy graduates, Motorola Solutions MSC-122 is working with universities around the world to bring advanced analytics training Motorola Solutions MSC-122 exam directly into the classroom.
QUESTION: 23 Which of the following interfaces are RFS6000 to the local network?
A. Management Ethernet (ME)
B. Gigabyte Ethernet (GE)
C. Uplink (UP)
D. Universal Serial Bus (USB)
recommended to connect an RFS4000 or
In which of the following modes does an RFS controller using WiNG 5 operate (select TWO)?
A. Hub mode
B. Bridge mode
C. Switch mode
D. Router mode
E. Repeater mode
F. Controller mode
Answer: B, D
You are deploying a WiNG 5 system and need to visualize Layer 1 activity only. Which of the following tools would allow you to do this?
A. Protocol Analyzer
B. Spectrum Analyzer
C. WLAN Discovery tool
D. Predictive Site Survey tool
E. Manual Site Survey tool
QUESTION: 26 You are monitoring a wireless client on a WLAN and are using a 2.4GHz radio to capture a wireless trace. When using the sniffer-redirect option on Motorola AP without off-channel scanning, how many simultaneous 20Mhz channels can be redirected by the AP?
Which of the following terms are used to describe Motorola AP-650s (select TWO)?
C. Non-Site survivable AP
D. Site Survivable AP
E. Independent AP
Answer: B, C
QUESTION: 28 When mounting an antenna on a metal wall, what special considerations do you have to take into account regarding RF propagation (select TWO)?
A. Length of antenna cable
B. The type of antenna to be used
C. Type of screws to be used
D. The distance the antenna is from the wall
E. Mounting height of the antenna
Answer: D, E
QUESTION: 29 Which of the following is the single biggest security vulnerability evident in the image below?
A. Use of no security on Visitor VLAN
B. Use of Pre-Shared Key on several WLANs
C. Use of Wired Equivalent Privacy on WLAN1g
D. Use of Temporal Key Integrity Protocol on WLAN1a
E. Use of Netgear and Motorola APs on the same RF bands
F. Use of Counter Mode with Cipher Block Chaining Message Authentication Code Protocol on several WLANs
QUESTION: 30 You have configured Radio 2 (5 GHz) of an AP-650 to use 802.11n 20/40 MHz channels. Under the WLAN configuration settings you have selected WPA/WPA2-TKIP using a PSK. To test the connection you associate an 802.lln client laptop device but notice that the connection speed between the two 802.11n devices is limited to 54 Mbps. See Exhibit: B.3.2.06 at the bottom. Which of the following is the most likely reason for this condition?
A. PSK is limited to 54 Mbps.
B. 802.11 Protection Mechanisms are in effect.
C. WPA/WPA2-TKIP encryption is limited to 54 Mbps.
D. Channels in the 5 GHz band are limited to 802.11a rates of 54 Mbps.
E. More wireless client devices are using 802.11a than are using 802.lln tipping the AP into legacy compatibility mode.
QUESTION: 31 Wi-Fi radios can generally operate in the presence of transmissions from neighboring radios, as long as the neighboring signal strengths are at -85 dBm or lower. In Exhibit
3.3.10 shown below, ESSIDs Tin, Silver, Chrome, and Visitors are virtual APs assigned to a single Motorola AP-650 radio. Which of the neighboring ESSIDs are most likely to cause co-channel interference to this AP?
E. Hidden SSID (MAC = 00:1C:F0:FA:65:94)
Answer: B, D
QUESTION: 32 You are trouble shooting a WiNG 5 deployment for a large customer that was configured with 3 separate WLANS on the RFS controller. Each of the WLANs were designated for three different departments (Finance, Human Resources, and Warehouse users). The customer is complaining that users from certain department are incorrectly attaining access to resources from other departments. Which of the following is the MOST likely reason this is happening?
A. No VLAN segmentation on the wired network
B. The layer 3 VLAN option has not been configured properly
C. WLAN segmentation has not been enabled on your RFS controller
D. VPN tunnel has not been established between the RFS controller and the core switch
QUESTION: 33 Which of the following types of AP adoption require that DHCP services be enabled on the AP’s native VLAN?
A. Layer 1 Adoption
B. Layer 2 Adoption
C. Layer 3 Adoption
D. Access Layer Adoption
E. Logical Layer Adoption
QUESTION: 34 You have just received a call from a customer who explains that the mobile computers on his WLAN:
-Are associating properly
-Have layer 3 connectivity
Are NOT reaching a server on the destination network The IP address of the RFS controller is 192.168.0.2 and the IP address of the remote server is 192.168.2.117. Which of the following, when performed, would allow the mobile computers to reach the destination network?
Add the following route: 0.0.0.0/0 192.168.1.1
Add the following route: 0.0.0.0/0 192.168.0.1
Add the following route: 192.168.0.1 255.255.255.0/24
Add the following route: 255.255.255.255/24 192.168.0.1
QUESTION: 35 After the initial deployment of a customer’s WLAN you attempt to verify that test AP Radios 1 and 2 are operational. You have assigned Radio 1 (2.4 GHz) to use the SSID “WLAN1” and Radio 2 (5 GHz) to use the SSID “WLAN2”. You perform a simple site survey using LANPlanner. LANPlanner plots the signal strength footprint of WLAN1 with no problem but WLAN2 does not show up in the LANPlanner heat map display. Based on the Wireless Configuration screen shown in Exhibit B.3.2.02 at the bottom, what are the most likely causes of this condition (select TWO)?
A. The “default” QoS policy is in use.
B. The SSID has been assigned to the wrong VLAN
C. The Broadcast SSID feature has been disabled.
D. The current configuration has not been pushed to the AP. E. The Allow RADIUS Override feature has been disabled. F. The Answer Broadcast Probes feature has been disabled
Answer: C, F
QUESTION: 36 You have deployed a Motorola WiNG 5 WLAN solution at the site of a new customer. Someone from the IT group of the customer will be designated the platform owner and will need to have the most robust set of administrative rights. To which administrative role would you assign to this individual?
F. Help Desk
QUESTION: 37 Following the installation of an RFS4000 controller with AP650 APs you use a popular WLAN discovery application to capture and display traffic to and from one of the APs. You notice that the majority of the transmitted frames are being sent at a very low speed, as shown in image below, even though the 802.11n connection supports a 130 Nbps signaling rate. What is the most likely cause of this condition?
A. Non-unicast traffic is being transmitted at Lowest Configured Basic Rate.
B. A “Tar Pit” style Wireless Denial of Service (DoS) attack is underway from a nearby intruder.
C. Beacons are always transmitted at 1 Mbps. Acknowledgements to the Beacons must be sent at the same speed.
D. An ACL policy has been configured to allow only 1 Mbps traffic, with the exception of Null Data frames, to traverse the Native VLAN.
QUESTION: 38 You have just completed the collection of Live RF measurement data using LANPlanner for the purpose of verifying the performance of a newly upgraded WLAN deployment. The customers reason for upgrading the previous system was to support VoWLAN in a multi-tenant office building using Motorola EWP3000 Smartphones. The original installation plan calls for an RSSI of -62 dBm from one primary AP per channel, with co-channel interference from nearby APs at a level of, no greater than, -85 dBm. In order to verify this condition you are checking 2.4 GHz Channel 11 and some additional overlapping channels which seem to have been mis- configured by neighboring WLANs. Using the LANPlanner information shown in the two exhibits at the bottom, which of the following APs satisfies the requirements for a VoWLAN deployment using the prerequisites shown above?
A. 00:14:6A:07:F1:90 in Region 1
B. 00:A0: FS:BB: F6:60 in Region 2
C. 00:14:69:F2:B0:30 in Region 2
D. 00:A0: FS: BB:F6:60 in Region 1
E. 00:14:69:F2:B0:30 in Region 3
QUESTION: 39 After deploying a new 802.11n WLAN you use a popular WLAN Discovery tool to analyze the channel settings being used in the vicinity. Using the information shown in the image below, which of the following statements is CORRECT concerning the use of channels in this area?
A. SSID WLAN1a is using 36 MHz channels
B. SSID Zinc is using 20/40 MHz channels 149 and 153
C. MAC address nex-G:6c:32:a2 is using an 802.11b-only reserved channel.
D. MAC address KENDIN:cf:ca:7d is using a channel which is illegal in ETSI nations.
You have been asked to cover a long narrow corridor and are determining the types of
antennas to install. All of the following antennas are suitable for this location,
A. Wall mount Patch Antenna
B. Omni Directional
C. Leaky Feeder
QUESTION: 41 A customer is looking to install a new Motorola Solutions wireless infrastructure along with purchasing new Motorola Solutions 802.11a/b/g mobile computers for a warehouse. Your account team has recommended the Motorola Solutions RFS6000 with AP650 s because of the latest S02.11n technology. The customer has asked what the benefit would be by putting in an 802.11n wireless infrastructure when they aren’t sing 802.11n clients. You are preparing a justification. All of the following are valid responses, EXCEPT:
A. 802.11n is backward compatible to legacy 802.11a/b/g clients.
B. 802.11n provides a larger coverage area for legacy 802.11a/b/g clients at higher data rates (36Mb/s, 54Mb/s).
C. Installing an 802.11n infrastructure provides better TCO and scalability for any future 802.11n clients that are added later.
D. An 802.11n wireless infrastructure automatically upgrades the radios in the mobile computers to 802.11n and allows them to take advantage of all the 802.lln features.
QUESTION: 42 You are positioning an AP on the 4th floor of a multi floor building. The site survey indicated that there are concrete floors, a concrete block wall on one side of the room, and a sheetrock wall on the other end of that room. Which of these obstacles will attenuate the signal the most?
A. The sheetrock wall
B. Concrete cinder block wall
C. Concrete floors at each level
D. Depends on how close the AP is to each item
QUESTION: 43 After setting up the WLAN according to the site survey, you observe unanticipated RF interference which can be neither eliminated nor avoided. In this situation what could be done to mitigate the effect on throughput?
A. Eliminate all security mechanisms
B. Change the network type to an IBSS
C. Adjust fragmentation to require larger frames
D. Adjust fragmentation to require smaller frames
FLYDUMPS Motorola Solutions MSC-122 exam sample questions that we can provide are based on the extensive research and real-world experiences from our online trainers, with over 10 years of IT and certification experience. Motorola Solutions MSC-122 exam sample questions, including Motorola Solutions MSC-122 questions and answers feed into our customers. FLYDUMPS Motorola Solutions MSC-122 exam sample questions covers all the practice test objectives to pass Motorola Solutions https://www.pass4itsure.com/MSC-122.html exam. The Motorola Solutions MSC-122 exam sample questions as well as our other Motorola Solutions MSC-122 exam training tools are not only priced to be easy on your budget – but each one is also backed with our guarantee. FLYDUMPS guarantees that after using our Riverbed certification training tools, you will be prepared to take and pass your Motorola Solutions MSC-122 exam.